- The 3D model developed by U.S. researchers can enhance the efficiency of green hydrogen production.
- Bubbles waste energy and increase power consumption during the water electrolysis process.
- The research team identified a critical bubble size, beyond which energy loss increases.
- The model can reduce the workload required for running simulations by approximately 1,000 times.
U.S. researchers have developed a three-dimensional (3D) computer model that promises to significantly improve the efficiency of green hydrogen production by revealing how bubbles waste energy during the water electrolysis process. This computational tool was co-created by scientists from Cornell University and their colleagues at City University of Hong Kong. The study found that tiny bubbles formed during the water electrolysis process interfere with hydrogen production and increase power consumption. At the same time, the research team identified a critical bubble size, beyond which energy loss increases. Simulation results indicate that keeping bubbles below this threshold can limit the additional voltage required per individual bubble to within three percentage points.
This 3D model also employs computational methods that reduce the workload required for running simulations by about 1,000 times without compromising numerical accuracy. Scientists hope these findings will significantly lower the production costs of green hydrogen.
Impact of Bubble Size on Production
The importance of bubble size Green hydrogen is a clean energy fuel produced through the water electrolysis process, which relies entirely on renewable energy sources such as solar or wind power to split water (H2) into hydrogen and oxygen. There are no carbon dioxide (CO2) emissions during the production process, meaning it can provide a clean alternative for industries including steel manufacturing and chemical production. However, the hydrogen and oxygen bubbles formed during this process pose significant challenges. When current flows through the electrolyzer, these bubbles form on the electrodes where chemical reactions occur, potentially blocking active reaction sites, hindering water flow to the electrode surface, or affecting the movement of charged particles, leading to increased power consumption during hydrogen production.
To address this issue, the research team has long attempted to modify electrode shapes, adjust fluid flow, and alter surface properties to help bubbles detach more easily. However, accurately calculating the energy loss caused by individual bubbles remains challenging. Lenan Zhang, an assistant professor at Cornell University's Sibley School of Mechanical and Aerospace Engineering and one of the lead authors of the study, noted, "In experiments, isolating the effects of bubbles on each individual scale is really challenging."
Innovations of the New Model
Revolutionary Approach In this project, the research team established a three-dimensional mathematical model that simulates processes spanning eight orders of magnitude. Weihong Li, an associate professor of mechanical engineering at City University of Hong Kong and the second lead author, stated that the model is akin to a digital twin of the electrolyzer. It can replicate the actual shapes, materials, and operating conditions of electrodes while revealing microscopic processes that are difficult to observe experimentally. Using this model, researchers were able to examine individual hydrogen bubbles on electrodes in alkaline electrolyzers. They found that when bubbles block the active surface of electrodes, it results in the greatest energy loss.
Additionally, they identified a critical bubble radius. Once bubbles exceed this size, the additional voltage required for electrolysis increases exponentially. Under certain simulation conditions, this additional voltage could exceed 50% of the voltage required without bubbles.
Future Research Directions
Moreover, scientists confirmed that this critical size depends on the geometry of the electrodes and the ease with which the liquid diffuses on their surfaces. They believe that creating electrodes capable of releasing bubbles before they become too large could enhance efficiency. The research team currently plans to expand the model to test the growth, merging, and interactions of multiple bubbles. They also intend to combine this technology with computational optimization and 3D printing to develop more efficient electrode designs. This research has been published in the journal EES Catalysis.
Impact of the 3D Model on Hydrogen Production
This study's three-dimensional computational model offers new insights into enhancing the efficiency of green hydrogen production. The issue of energy loss caused by bubbles during the water electrolysis process has long troubled scientists, and this model can accurately simulate bubble behavior and its impact on the electrolysis process. By identifying the critical size of bubbles, researchers hope to develop more efficient electrode designs, further reducing production costs. This is significant for advancing the application of green hydrogen as a clean energy source, especially in the context of reducing carbon dioxide emissions.

