- The U.S. Nuclear Regulatory Commission has approved the construction permit for Texas's first high-temperature gas-cooled reactor.
- The Long Mott plant will utilize four Xe-100 small modular reactors.
- The facility is designed to provide high-temperature steam and electricity for energy-intensive manufacturing processes.
- The NRC's approval marks several regulatory firsts, demonstrating its capacity to evaluate advanced reactor designs.
The U.S. Nuclear Regulatory Commission (NRC) has issued a construction permit for a four-reactor nuclear power plant in Texas, marking the first approval of a high-temperature gas-cooled reactor (HTGR) in nearly 60 years. The Long Mott plant, planned for Calhoun County, Texas, will utilize four Xe-100 small modular reactors (SMR) developed by U.S.-based X-energy. The project is being developed by Long Mott Energy, a wholly-owned subsidiary of chemical manufacturer Dow, specifically for its Seadrift Operations site.
Design Purpose of the High-Temperature Gas-Cooled Reactor
The facility is primarily designed to provide high-temperature steam for Dow's industrial processes while also generating electricity and sending excess power to the grid. This construction permit represents a significant milestone for advanced nuclear technology in the U.S. It is the NRC's third advanced reactor construction permit issued in 2026 and the agency's first approval of a multi-module advanced reactor facility.
The four Xe-100 reactors have a total thermal power output of 800 megawatts (MWth) and an electrical capacity of 320 megawatts (MWe). Each module is designed to produce approximately 80 MWe of electricity while providing heat for industrial applications. Unlike traditional nuclear power plants that primarily focus on electricity generation, the Long Mott facility is designed around the energy needs of the industrial site. High-temperature steam can support energy-intensive manufacturing, potentially replacing traditional fossil fuel-based heat sources. The Xe-100 is a high-temperature gas-cooled reactor that uses helium as a coolant and contains tri-structural isotropic (TRISO) fuel particles in a graphite pebble bed.
The pebble bed core design allows for the addition of fuel during operation without the need to shut down the reactor as is required for traditional fuel replacement.
Regulatory Significance of NRC Approval
The NRC's approval also marks several regulatory firsts, including its first construction permit for a pebble bed reactor, the first approval for a reactor design with online refueling, and its first review of HTGR under a risk-informed, technology-inclusive permitting modernization framework. The agency completed its comprehensive safety assessment in October, ahead of schedule. It had previously issued an environmental assessment and a finding of no significant impact for the project in May. The agency noted that its review was completed in 18 months, demonstrating its ability to evaluate advanced reactor designs while maintaining safety requirements.
NRC Chairman Ho K. Nieh stated, "Today, the new NRC has issued the first construction permit for a high-temperature gas-cooled reactor in the United States in half a century." The permit authorizes Long Mott Energy to construct the facility according to the approved design. However, it does not allow the company to load nuclear fuel or operate the reactor. A separate operating license from the NRC is required before the plant can begin generating electricity. Dow also clarified that obtaining the permit does not constitute a final investment decision to proceed with construction. The company still needs to complete engineering and design work and obtain board approval.
If the project proceeds, construction could begin later this decade, with the facility expected to start operations in the early 2030s. The project is being developed under the U.S. Department of Energy's Advanced Reactor Demonstration Program, which supports the development and deployment of next-generation nuclear technologies.
Future Potential of High-Temperature Gas-Cooled Reactors
The approval of high-temperature gas-cooled reactors is significant for the U.S. nuclear industry as it represents an openness to new nuclear technologies. This technology not only provides electricity but also offers high-temperature steam for industrial processes, potentially replacing traditional fossil fuel heat sources and reducing carbon emissions. The NRC's approval also demonstrates the regulatory body's flexibility regarding technological innovation, which is crucial for advancing next-generation nuclear technologies. As the construction process moves forward, this could bring transformative changes to the energy landscape in the United States.

