- Chinese researchers propose an acid-free method for silver recovery.
- The new method utilizes a molten mixture of sodium hydroxide and potassium hydroxide.
- The process effectively recovers silver while limiting damage to the silicon wafers.
- The research provides a practical solution for solar cell recycling.
Chinese researchers have recently introduced a novel eco-friendly method aimed at extracting valuable silver from decommissioned solar panels without using toxic acids. The process involves immersing the solar cells in a molten mixture of sodium hydroxide and potassium hydroxide salts. This molten salt weakens the coating on the silicon wafers, allowing the silver wires to be stripped off in their pure metallic form. Researchers from Ningxia University successfully recovered up to 97% of the silver while limiting damage to the underlying silicon wafers to within 2.6%. The research team noted in their paper, "These findings clarify the acid-free, low-loss mechanisms for precious metal recovery, particularly for crystalline silicon photovoltaic materials."
As the first generation of commercial solar panels reaches their 25 to 30-year lifespan, aging infrastructure has become a significant waste issue, but it also presents a massive treasure hunt. The silver content in retired solar panels is less than 0.03%, yet it accounts for nearly half of their monetary value. The process of recovering this precious metal has not been environmentally friendly in the past. A Chinese team has designed a cleaner alternative. This new laboratory-scale method utilizes a molten mixture of sodium hydroxide and potassium hydroxide to strip silver wires from retired solar cells.
Challenges in Recycling Aging Solar Cells
Traditional solar recycling methods involve acid leaching, where nitric acid dissolves solid silver into silver ions, leaving behind toxic nitrogen oxide emissions, acidic wastewater, and complex chemical recycling processes. However, the molten salt strategy completely bypasses this chemical detour.
This high-temperature salt bath targets the silicon nitride (SiNx) passivation layer of the solar cells rather than directly dissolving the metal. It etches this layer, weakening the adhesion at the interface, allowing the intact metallic silver wires to fall away. The process is quick and efficient. At 230 °C for 150 seconds, the system recovered 94.34% of the silver while removing the SiNx coating. Under optimal conditions, the total silver recovery rate reached 97.11%. However, protecting the underlying silicon wafers posed a challenging barrier. Earlier molten salt methods failed to prevent the salt bath from corroding the valuable silicon substrate.
After determining the precise chemical mechanisms driving the corrosion, the research team successfully limited this damage.
Hydroxide ions immediately begin attacking the exposed silicon after the protective silicon nitride layer is stripped away. This reaction converts silicon into soluble silicates, leaving tiny pits on the surface. By precisely controlling the temperature and exposure time of the salt bath, researchers limited total silicon loss to below 2.62% under conditions of 230 °C and 100 seconds. The research report states, "At 230 °C and 150 seconds, the silver recovery rate reached 94.34%, while the SiNx passivation layer was effectively removed, achieving a maximum silver recovery rate of 97.11%."
Potential of Acid-Free Recovery Methods
Although the process is currently only operational at the laboratory scale, understanding the mechanism for direct silver stripping may provide practical solutions for green industrial recycling. This acid-free, low-loss method can effectively recover precious silver from retired silicon solar panels without damaging the underlying substrate. The introduction of this method comes at a crucial time, preparing the global solar market for the impending influx of panel waste.
The research findings were published on October 28 in the journal Cleaner Production.
Contribution of New Recycling Technology to Environmental Protection
As solar panels gradually reach the end of their life cycle, effectively recovering precious metals from them has become an important issue. Traditional acid leaching methods not only pose significant environmental concerns but may also have long-term impacts on the environment. The acid-free recovery method proposed by Chinese researchers, which utilizes molten salts to strip silver metal, demonstrates cleaner recycling potential. This not only improves silver recovery rates but also reduces damage to silicon substrates, holding significant implications for the future solar cell recycling market.

