Chinese Researchers Develop MA-Free Perovskite Solar Modules with 22.7% Efficiency and 98% Stability

·by Henderson·Engineering
Chinese Researchers Develop MA-Free Perovskite Solar Modules with 22.7% Efficiency and 98% Stability
Key Points
  • Chinese researchers have developed MA-free perovskite solar modules with an efficiency of 22.7%.
  • The module maintained nearly 98% of its original efficiency in stability tests.
  • Slot-die coating technology is suitable for large-scale production and efficiently utilizes materials.
  • The new design enhances durability, with efficiency remaining unchanged after continuous operation.

Chinese researchers have developed a new type of MA-free perovskite solar module that achieves an energy conversion efficiency of 22.7%. In stability tests, the module retained nearly 98% of its original efficiency. The Chinese Academy of Sciences and Dalian Jiaotong University collaborated to create a process for producing uniform perovskite solar modules using slot-die coating technology under conventional environmental conditions. Research author Zhang Zhihua stated, "We have developed a reliable manufacturing process for producing uniform, high-efficiency MA-free perovskite solar modules under environmental conditions."

Advantages of MA-Free Materials

Traditional perovskite materials are prone to thermal defects, and perovskite solar cells are widely used in the photovoltaic field due to their high efficiency and low manufacturing costs. However, many high-performance devices rely on methylammonium (MA), which is susceptible to degradation under heat. Degraded MA releases volatile compounds that damage the crystal structure of perovskite, increasing defects over time and reducing cell efficiency. To overcome this limitation, researchers designed an MA-free perovskite material combined with a new crystallization strategy to improve film formation during the manufacturing process. The research team noted that slot-die coating technology is particularly suitable for large-scale production, as it efficiently utilizes materials and can be integrated into continuous roll-to-roll production lines.

Slot-die coating differs from the commonly used spin-coating process in laboratories, as it can uniformly coat perovskite solution over a larger surface area, making it more suitable for commercial-scale production. However, producing uniform films over large areas remains a significant challenge, as perovskite crystals must form uniformly during the processing. Researchers addressed this challenge by introducing a combined additive strategy using rubidium thiocyanate (RbSCN) and formamidinium thiocyanate (FASCN). These additives work together to guide crystal growth, facilitating the transition of the material from a non-photoactive δ phase to a photoactive α phase that generates electricity.

At the same time, they suppress the formation of excess secondary phases that could degrade device performance.

According to the researchers, reducing the energy barrier between these two crystal structures makes the crystallization process more predictable and results in films with fewer defects. Zhang Zhihua pointed out, "This research does not impose stricter constraints on process control but rather makes the crystallization process itself more tolerant to processing variations." The team reported that this combination of additives extends the processing window for uniform crystallization to over 100 seconds, allowing dense, high-quality perovskite films to form larger grains, reduce residual stress, and achieve a more uniform composition throughout the film.

Performance Improvements with New Coating Method

The new coating method has improved the performance of both laboratory cells and larger solar modules. Researchers reported that small-area solar cells achieved an energy conversion efficiency of 26.16%. A module with an active area of 54.8 square centimeters achieved an efficiency of 22.70%, compared to a reference module without the additive strategy, which had an efficiency of 15.8%. The durability of the new design has also been enhanced. According to the study, during stability tests at a device temperature of 149°F, the unencapsulated solar module retained 97.76% of its original efficiency, even after 1,300 hours of continuous operation, equivalent to over 54 days of continuous use under strong sunlight.

In contrast, the control device without the additive strategy retained only 65.86% of its initial efficiency under the same conditions. Researchers stated that expanding the processing window and improving crystal control could make slot-die coating technology a viable option for large-scale production of perovskite solar modules. These findings were recently published in the journal Advanced Materials.

ItemSpecification
Energy Conversion Efficiency22.7%
Small Area Solar Cell Efficiency26.16%
Module Active Area54.8 square centimeters
Stability Test Efficiency Retention97.76%
Continuous Operation Time1,300 hours

Commercial Potential of Slot-Dye Coating Technology

The development of MA-free perovskite solar modules marks a significant advancement in photovoltaic technology, particularly in terms of stability and efficiency. The thermal defect issues associated with traditional perovskite materials have long been a barrier to their commercialization, and this research successfully addresses these challenges through slot-die coating technology and additive strategies. This not only enhances the performance of the modules but also paves the way for future large-scale production. With the increasing demand for renewable energy, the commercial potential of this technology is noteworthy and may have a profound impact on the photovoltaic market.

H
About the author
Henderson