A German research team has developed 3D-printed shape memory polymer hinges that reduce the weight of satellite solar panel deployment by 93%.

·by Henderson·Engineering
A German research team has developed 3D-printed shape memory polymer hinges that reduce the weight of satellite solar panel deployment by 93%.
Key Points
  • The hinges developed by the German research team weigh approximately 93% less.
  • The hinges deploy solar panels using heat-triggered shape changes.
  • 4D printing technology can produce components in a short time.
  • This technology still requires further testing under space conditions.

Researchers at the Fraunhofer Institute for Applied Polymer Research (Fraunhofer IAP) in Germany have developed 3D-printed shape memory polymer hinges, an innovative technology that assists satellites in deploying their solar panels while reducing mechanical hardware. According to the researchers, each hinge weighs about 1.4 grams, making it approximately 93% lighter than traditional hinges currently used in satellite systems. The technology uses heat to trigger pre-set shape changes, allowing folded solar panels to deploy after launch. This development is part of the "Additive Manufacturing of Solar Panels for Space (AM-SPACE)" project, which combines Fraunhofer IAP, German Orbital Systems (GOS), Orion Additive Manufacturing, and the Fraunhofer Institute for Reliability and Microintegration (IZM).

Shape Memory Polymer Technology

Heat-triggered shape recovery technology utilizes shape memory polymers (SMPs), which can be programmed to temporary shapes and return to their original shape upon heating. Researchers process the polymers into filaments suitable for additive manufacturing, which are used to produce hinges and hold and release mechanisms (HDRMs). The latter secures satellite components during launch and releases them in a controlled manner once the spacecraft is in orbit. When the release mechanism is activated, the polymer hinges deploy the solar panels using heat. Heating elements raise the temperature of the hinges from 73.4°F to 284°F, triggering their pre-set shape recovery.

Under controlled laboratory conditions, the hinges complete deployment in about 60 seconds. This method may reduce the need for traditional mechanical drive systems, which add weight and complexity to satellite deployment structures.

Advantages of 4D Printing

Researchers have also simplified component production using additive manufacturing technology. Printing a hinge or HDRM takes about 15 minutes, followed by an additional 30 minutes to program its temporary shape. A separate 4D printing method integrates the shape-changing response directly into the component during the manufacturing process. Using this method, the team produced HDRMs in about five minutes. Researchers state that this approach could enable satellites to launch in a compact configuration and then deploy their solar panels or antennas in orbit. Additionally, it may allow small spacecraft to activate other deployable components.

Unlike traditional 3D printing, 4D printing incorporates programmed responses, allowing printed objects to change shape or function when exposed to external stimuli such as heat.

The technology has undergone preliminary laboratory validation, including cleanroom tests, thermal cycling, and initial vacuum chamber experiments. One type of polymer has also passed outgassing tests conducted by the Spanish National Institute for Aerospace Technology (INTA). However, these components have not yet been tested in orbit, and their long-term reliability under actual space conditions remains to be confirmed. German Orbital Systems has expressed interest in evaluating these components in space and is currently discussing follow-up projects to conduct in-orbit demonstrations. The AM-SPACE project runs from October 2023 to September 2026 and is funded through a regional innovation program with support from the European Union.

Potential Impact of This Technology on Space Missions

This 3D-printed shape memory polymer hinge technology demonstrates innovative potential in the aerospace field. By reducing weight and simplifying mechanical structures, it not only lowers launch costs but also enhances satellite deployment efficiency. With the application of 4D printing technology, more flexible spacecraft designs may emerge in the future, capable of adjusting their shape or function in orbit as needed. However, the reliability of this technology in actual space environments still requires further validation, which will be a focus of future research.

H
About the author
Henderson